Navigation

No products in the cart.

Shop

Return to Previous Page
Description

Description

Working width: 120cm / 47.2 inch.
Working width, min/max: 114cm/120cm / 44.9 “/47.2 “.
Angle adjustment steps: 3.
Angle adjustment, left/right: 18/18°.
Broom diameter: 40cm / 15.7 “.
Number of brushrings: 33.
Rotational speed: 320 rpm.
Height adjustment range: 8cm / 3.1 “.
Transmission manufacturer: Bonfiglioli.
Transmission type: VF49.
Gear reduction: 7:1.
Base machine, length: 133cm / 52.4 inch.
Base machine, width: 133cm / 52.4 inch.
Base machine, height: 108cm / 42.5 inch.
Weight: 65kg / 143.3 lbs.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Husqvarna Broom for 400 Series Riders >2019 & P524”

Related Products

Husqvarna Rider Fits RC Rider Collect

Rotating broom for sweeping up leaves, snow, etc. Can be angled to either side. The broom has an included Spray guard.
£1,627.00 Add to basket

Mantis 9222 Tiller Wheel Kit

The Mantis tiller wheel kit lets you have the option to roll or carry your Mantis Tiller to your garden Park your Mantis Tiller in an upright position to add petrol, or store it upright when you don’t have a wall to lean it against. Wheels add stability when you use the Crevice Cleaner or Border Edger attachments. Rubber wheels make the Mantis Tiller easy to roll around your garden, over curbs, and up hills. Attaches to your Tiller in a few minutes.  
£109.00 Add to basket

Husqvarna Broom

A rotating broom for sweeping leaves, gravel, snow etc. Shaft driven with bevel gear and chain drive. Two rear solid support wheels for ground following. Requires hydraulic kit. PTO driven large diameter broom with adjustable working angle. Max/min working width 130/120cm. A rotating broom for sweeping leaves, gravel, snow etc. Shaft driven with bevel gear and chain drive. Two rear solid support wheels for ground following. Requires 966754501 hydraulic kit & counterweight 966754901.
£5,381.00 Add to basket

GTM Chippers Rattlewedge Splitter

The Rattle Wedge is a patented tool developed by tree climbers for tree climbers, and this to improve safety and working conditions when disassembling trees. Previously, the tree specialist had to maneuver in difficult positions or rely on the help of employees on the ground to drop pieces of stem in the right direction. Now the tree climber can easily handle large pieces of trunk. You must have seen it to believe it! The Rattle Wedge, made of lightweight aluminum, weighs just 1.4 kg and can easily be taken into the tree. The Rattle Wedge is also an important tool for the chainsaw. In the circumstances where the saw blade threatens to get stuck, it is easy to turn the ratchet wedge into the saw cut, so that there is no pressure on the blade. If the cut is full and there is maximum pressure on the wedge, you can simply unscrew it again. The Rattle Wedge will no doubt become basic equipment for every professional tree climber within a short time!
£175.00 Add to basket

Husqvarna Flail Mower (Fits RC320Ts AWD Rider)

Robust, reliable flail mower for rough areas with overgrown grass and low brushwood. Working width 90 cm. Recommended for use on RC320Ts AWD-models only. Fi
£1,583.00 Add to basket

Husqvarna TRO050 – Pair of Curved Loading Ramps

Convenient curved ramps, of saltwater-resistant aluminium. The ramps have an efficient non-slip surface which provides good grip for many different types of tyres. Suit trailers with a height up to 700 mm and a max load of 450 alt. 1000 kg.
£246.00 Add to basket

Mantis 5222 Power Tiller Dethatcher for Gardening

Are weeds and moss a problem for you? Then you need the Mantis dethatcher attachment! This dethatcher quickly removes weeds, dead grass, moss, and the tan-looking built-up “thatch” that can choke your lawn. The 60 spring-steel picks let you dethatch a 15" / 38cm swath with a single pass. The Mantis dethatcher attachment eliminates hours of back-breaking work. Thatch harbours insects, creates a water barrier, and prevents new grass from growing. Dethatch your lawn regularly, especially before feeding and fertilising. This dethatcher is NOT suitable for the Deluxe XP Tiller.This Mantis lawn aerator is not suitable for the Mantis Deluxe XP Tiller.
£249.00 Add to basket

Husqvarna 450kg Straight Loading Ramps 200 X 2000 X 35

Straight made of sea water resistant aluminium with the well-known slip resistant surface O3, which gives any wheel a secure grip even in wet and slippery environments. The loading ramps are well suited for use on trailers. The ramps are sold in pairs.
£184.00 Add to basket

Husqvarna Broom for 400 Series Riders >2019 & p524

Heavy duty, big diameter broom for sweeping gravel, snow debris etc. Shaft driven with bevel gear and chain drive. Robust height adjustment system. Angle adjustment from the drivers seat. The unique Swing speed gear enables high angle adjustment without noise and vibrations. Requires hydraulic kit and counter weight. Note: Replaces Broom 966 75 44-01
£2,199.00 Add to basket

Husqvarna Snow Blade Wheels and Rubber Scraper Kit

Kit containing support wheels and rubber scraper. Fits snow blade 592 75 51-01
£278.00 Add to basket
Back to top